Instrument Panel Safety Pad: Reassembly

INSTALL FRONT PASSENGER AIRBAG ASSEMBLY (See INSTALLATION )
INSTALL COOLER SWITCH HOLE COVER (w/o Automatic Light Control System)
1. Engage the 2 claws and install the cooler switch hole cover.
  
  Fig 1: Identifying Cooler Switch Hole Cover & Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL AUTOMATIC LIGHT CONTROL SENSOR (w/ Automatic Light Control System) (See INSTALLATION )
INSTALL NO. 4 INSTRUMENT PANEL WIRE
1. Engage the 5 clamps.
2. Connect the connector and install the No. 4 instrument panel wire.
  
  Fig 2: Identifying No. 4 Instrument Panel Wire & Clamps
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL ANTENNA CORD SUB-ASSEMBLY (for Pole Antenna Type) (See INSTALLATION )
INSTALL ANTENNA CORD SUB-ASSEMBLY (for Glass Antenna Type) (See INSTALLATION )
INSTALL NAVIGATION ANTENNA ASSEMBLY (See INSTALLATION )
INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY
1. Install the No. 2 instrument panel register assembly with the 3 screws < F >.
  
  Fig 3: Identifying No. 2 Instrument Panel Register Assembly Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY
1. Install the No. 1 instrument panel register assembly with the 3 screws < F >.
  
  Fig 4: Identifying No. 1 Instrument Panel Register Assembly Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL CENTER HEATER TO REGISTER SUB DUCT
1. Install the center heater to register sub duct with the 2 screws < F >.
  
  Fig 5: Identifying Center Heater To Register Sub Duct Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL DEFROSTER NOZZLE ASSEMBLY
1. Install the defroster nozzle assembly with the 3 screws < F > and clip.
  
  Fig 6: Identifying Defroster Nozzle Assembly Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL SIDE NO. 2 DEFROSTER NOZZLE DUCT
1. Install the side No. 2 defroster nozzle duct with the screw < F >.
  
  Fig 7: Identifying Side No. 2 Defroster Nozzle Duct Screw
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL SIDE NO. 1 DEFROSTER NOZZLE DUCT
1. Install the side No. 1 defroster nozzle duct with the screw < F >.
  
  Fig 8: Identifying Side No. 1 Defroster Nozzle Duct Screw
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 4 HEATER TO REGISTER DUCT
1. Install the No. 4 heater to register duct with the 3 screws < F >.
  
  Fig 9: Identifying No. 4 Heater To Register Duct Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 1 HEATER TO REGISTER DUCT
1. Install the No. 1 heater to register duct with the 3 screws < F >.
  
  Fig 10: Identifying No. 1 Heater To Register Duct Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002