Evaporator Temperature Sensor: Installation
WARNING: This page is about a different car, the 2007 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL EVAPORATOR TEMPERATURE SENSOR
- Install the evaporator temperature sensor.
- INSTALL EVAPORATOR SUB-ASSEMBLY (See REASSEMBLY )
- INSTALL COOLING UNIT
- Install the cooling unit (see REASSEMBLY ).
- CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
- PERFORM INITIALIZATION
- Perform initialization (see INITIALIZATION
).NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
- Perform initialization (see INITIALIZATION
).