LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 245 (Tire And Wheel) >> Tire Pressure Warning Ecu >> Installation

Tire Pressure Warning Ecu: Installation

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL TIRE PRESSURE WARNING ECU 
    1. Install the tire pressure warning ECU with the screw.
    2. Fig 1: Identifying Tire Pressure Warning ECU Connector And Screw
      G05401047Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Connect the tire pressure warning ECU connector.
  2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY  (See INSTALLATION )
  3. REGISTER TRANSMITTER ID 

    (See REGISTRATION  )

  4. INSPECT TIRE PRESSURE WARNING SYSTEM 

    (See TEST MODE PROCEDURE  )