LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 243 (Meter) >> LIGHT CONTROL RHEOSTAT (for Sedan) >> Installation

LIGHT CONTROL RHEOSTAT (for Sedan): Installation

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL LIGHT CONTROL RHEOSTAT 
    1. Engage the 2 claws and install the light control rheostat.
      2. Fig 1: Identifying Light Control Rheostat Claws
      G04833477Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Connect the connector.
  2. INSTALL INSTRUMENT PANEL BOX  (See INSTALLATION )
  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 

    Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 

scientia non olet · About LEMON Manuals