WASHER LEVEL WARNING SWITCH (for Hatchback): Removal

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
REMOVE FRONT BUMPER COVER (See REMOVAL )
REMOVE HEADLIGHT ASSEMBLY RH (See REMOVAL )
DRAIN WASHER FLUID
1. Disconnect the 2 washer hoses from the windshield washer motor and pump, and drain the washer fluid.
REMOVE WINDSHIELD WASHER JAR ASSEMBLY
1. Disconnect the 2 harness clamps.
2. Disconnect the 3 connectors.
3. Remove the 2 bolts.
4. Remove the windshield washer jar.
  
  Fig 1: Identifying Windshield Washer Jar Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE WASHER LEVEL WARNING SWITCH
1. Pull the washer motor and pump out of the packing of the washer jar.
  
  Fig 2: Identifying Washer Level Warning Switch
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002