WASHER LEVEL WARNING SWITCH (for Hatchback): Installation

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL WASHER LEVEL WARNING SWITCH
1. Install the washer level warning switch onto the packing of the washer jar.
  
  Fig 1: Identifying Washer Level Warning Switch
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL WINDSHIELD WASHER JAR ASSEMBLY
1. Install the windshield washer jar.
  
  Fig 2: Identifying Windshield Washer Jar
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the 2 bolts.
  Torque: 5.5 N*m (56 kgf*cm, 49 in.*lbf)
3. Connect the 3 connectors.
4. Connect the 2 harness clamps.
FILL UP WASHER JAR AND PUMP ASSEMBLY WITH WASHER FLUID
1. Connect the washer hose to the washer motor and pump, and fill the washer jar with washer fluid.
Fig 3: Identifying Washer Hose To Washer Motor And Pump
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL HEADLIGHT ASSEMBLY RH (See INSTALLATION )
INSTALL FRONT BUMPER COVER (See INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)