Transmission Revolution Sensor: Removal

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE BATTERY (See REMOVAL )
REMOVE BATTERY TRAY
REMOVE BATTERY CARRIER (See REMOVAL )
REMOVE TRANSMISSION REVOLUTION SENSOR
1. Disconnect the transmission revolution sensor connector.
2. Remove the bolt and transmission revolution sensor.
  
  Fig 1: Identifying Bolt And Transmission Revolution Sensor
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Remove the O-ring from the transmission revolution sensor.
  
  Fig 2: Identifying O-Ring And Transmission Revolution Sensor
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002