LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 225 (Air Conditioning) >> AIR CONDITIONING PANEL (for Automatic Air Conditioning System) >> Installation

AIR CONDITIONING PANEL (for Automatic Air Conditioning System): Installation

WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL AIR CONDITIONING CONTROL ASSEMBLY 
    1. Connect the connectors.
    2. Attach the 3 clips to install the air conditioning control.
      Fig 1: Identifying Air Conditioning Control Assembly And Screws
      G05585475Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Install the 2 screws.
  2. INSTALL RADIO RECEIVER  (See INSTALLATION )
  3. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL CENTER  (See INSTALLATION )
  4. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL CENTER  (See INSTALLATION )
  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  6. CHECK SRS WARNING LIGHT 
    1. Check the SRS warning light (see DIAGNOSIS SYSTEM ).