LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 222 (Lighting) >> High Mounted Stop Light Assembly >> Removal

High Mounted Stop Light Assembly: Removal

WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  2. REMOVE BACK DOOR CENTER GARNISH  (See DISASSEMBLY )
  3. REMOVE CENTER STOP LIGHT ASSEMBLY 
    1. Disconnect the connector.
    2. Remove the 2 screws and center stop light.
      Fig 1: Identifying Center Stop Light Assembly
      G05586016Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals