AIR CONDITIONING PANEL ASSEMBLY (for Sedan): Installation

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

CONNECT AIR INLET DAMPER CONTROL CABLE SUB-ASSEMBLY
1. Engage the 2 claws and connect the air inlet clamper control cable.
  
  Fig 1: Disconnecting Air Inlet Damper Control Cable
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
CONNECT DEFROSTER DAMPER CONTROL CABLE SUB-ASSEMBLY
1. Engage the 2 claws and connect the defroster damper control cable.
  
  Fig 2: Disconnecting Defroster Damper Control Cable
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
CONNECT AIR MIX DAMPER CONTROL CABLE SUB-ASSEMBLY
1. Engage the 2 claws and connect the air mix control cable clamp.
2. Connect the air mix damper control cable to the clamp.
  
  Fig 3: Disconnecting Air Mix Damper Control Cable
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL AIR CONDITIONING PANEL ASSEMBLY
1. Connect the 3 connectors and the 4 clamps.
  
  Fig 4: Disconnecting Connectors And Clamps
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Engage the 4 clips and 2 claws and install the air conditioning panel.
  
  Fig 5: Removing Air Conditioning Panel
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL INSTRUMENT CLUSTER FINISH PANEL CENTER SUB-ASSEMBLY
1. Engage the 4 clips and 2 claws and install the instrument cluster finish panel.
INSTALL RADIO RECEIVER ASSEMBLY
INSTALL INSTRUMENT CLUSTER FINISH PANEL (See INSTALLATION )
INSTALL INSTRUMENT PANEL FINISH PANEL END RH (See INSTALLATION )
INSTALL INSTRUMENT PANEL FINISH PANEL END LH (See INSTALLATION )

Fig 6: Installing Instrument Cluster Finish Panel
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL INSTRUMENT PANEL FINISH PANEL LOWER CENTER (See INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)