RADIO RECEIVER (for Sedan): Disassembly
WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.
- REMOVE INSTRUMENT PANEL CENTER REGISTER ASSEMBLY (for Integrated with Panel) (See REMOVAL )
- REMOVE RADIO BRACKET RH
- for Integrated with Panel:
- Remove the 4 screws and the radio bracket.
- except Integrated with Panel:
- Remove the 4 screws and the radio bracket.
- for Integrated with Panel:
- REMOVE RADIO BRACKET LH
HINT:
Use the same procedure as for the RH side.