LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 196 (Audio System & Visual System) >> RADIO RECEIVER (for Hatchback) >> Installation

RADIO RECEIVER (for Hatchback): Installation

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL RADIO RECEIVER ASSEMBLY 
    1. Connect the connectors.
    2. Install the radio receiver with the 4 screws.
  2. INSTALL INSTRUMENT CLUSTER CENTER FINISH PANEL SUB-ASSEMBLY  (See INSTALLATION )
  3. INSTALL INSTRUMENT CLUSTER FINISH PANEL  (See INSTALLATION )
  4. INSTALL INSTRUMENT PANEL FINISH PANEL END RH  (See INSTALLATION )
  5. INSTALL INSTRUMENT PANEL FINISH PANEL END LH  (See INSTALLATION )
  6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 

    Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 

    Fig 1: Removing Radio Receiver
    G04833523Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals