BACK DOOR COURTESY SWITCH (for Hatchback): Installation

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL BACK DOOR LOCK ASSEMBLY
1. Install the back door lock with the 3 bolts.
  Torque: 7.5 N*m (76 kgf*cm, 66 in.*lbf)
2. Connect the connector and clamp.
INSTALL BACK DOOR TRIM BOARD ASSEMBLY (See REASSEMBLY )

Fig 1: Locating Connector And Clamp
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)