BACK DOOR LOCK (for Hatchback): Removal

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
REMOVE BACK DOOR TRIM BOARD ASSEMBLY (See DISASSEMBLY )
REMOVE BACK DOOR LOCK ASSEMBLY
1. Disconnect the connector and the clamp.
2. Remove the 3 bolts and the back door lock.
  
  Fig 1: Locating Connector And Clamp
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE BACK DOOR LOCK ACTUATOR ASSEMBLY
1. Disconnect the connector.
2. Remove the 2 bolts and the back door lock actuator.
  
  Fig 2: Locating Bolts And Back Door Lock Actuator
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002