Fuel Pressure Pulsation Damper: Removal
WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
- DISCHARGE FUEL SYSTEM PRESSURE (See REMOVAL )
- DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
- REMOVE INTAKE AIR SURGE TANK ASSEMBLY (See appropriate step(s) under REMOVAL )
- REMOVE FUEL PRESSURE PULSATION DAMPER
- Remove the clip.
- Pull out the fuel pressure pulsation damper from the fuel delivery pipe.