LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 121 (Air Conditioning) >> AMBIENT TEMPERATURE SENSOR (For Automatic Air Conditioning System) >> Removal

AMBIENT TEMPERATURE SENSOR (For Automatic Air Conditioning System): Removal

WARNING: This page is about a different car, the 2007 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  2. REMOVE FRONT BUMPER COVER 
    1. Remove the front bumper cover (see REMOVAL ).
  3. REMOVE AMBIENT TEMPERATURE SENSOR 
    1. Using a screwdriver, pull out the sensor, then disconnect the connector.

      HINT:

      Tape the screwdriver tip before use.

scientia non olet · About LEMON Manuals