Section 120 ((Door / Hatch)): Hood: Installation

WARNING: This page is about a different car, the 2007 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL CUSHION RUBBER
1. Install the 4 cushion rubbers.
INSTALL ENGINE HOOD LOCK STRIKER ASSEMBLY
1. Install the hood lock striker with the 3 bolts.
  Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf)
  
  Fig 1: Installing Hood Lock Striker With Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL RADIATOR SUPPORT OPENING COVER (See appropriate step(s) under INSTALLATION )
INSTALL HOOD HINGE ASSEMBLY LH
1. Install the hood hinge with the 2 bolts.
  Torque: 13.0 N*m (133 kgf*cm, 10 ft.*lbf)
  
  Fig 2: Installing Hood Hinge With Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL HOOD HINGE ASSEMBLY RH
1. Install the hood hinge with the 2 bolts.
  Torque: 13.0 N*m (133 kgf*cm, 10 ft.*lbf)
INSTALL HOOD SUB-ASSEMBLY
1. Install the hood with the 4 bolts.
  Torque: 13.0 N*m (133 kgf*cm, 10 ft.*lbf)
2. Adjust the hood position (see ADJUSTMENT ).
  
  Fig 3: Installing Hood With Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL HOOD AUXILIARY CATCH HOOK ASSEMBLY
1. Install the hook with the bolt.
  Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf)
  
  Fig 4: Installing Hood Auxiliary Catch Hook Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
CONNECT WINDSHIELD WASHER HOSE
1. Attach the 3 clamps to connect the washer hose.
  
  Fig 5: Attaching Clamps To Washer Hose
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL WASHER NOZZLE SUB-ASSEMBLY
INSTALL HOOD INSULATOR
1. Install the hood insulator with the 7 clips.
  
  Fig 6: Installing Hood Insulator With Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002