Parking Brake Assembly: Installation

1. Align the matchmarks of the disc and axle hub and install the disc.

1. Provisionally install the 2 hub nuts.
2. Remove the hole plug, and turn the adjuster to expand the shoe until the disc locks.
3. Contract the shoe adjuster until the disc rotates smoothly.

   Standard: Return 8 notches 

4. Install the hole plug.
   Fig 1: Adjusting Parking Brake Shoe Clearance

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Install the disc brake caliper with the 2 bolts and 2 washers.

   Torque: 105 N*m (1,071 kgf*cm, 78 ft.*lbf) 

   Fig 2: Identifying Disc Brake Caliper Bolts

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Torque: 112 N*m (1,137 kgf*cm, 82 ft.*lbf)