LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Camry Base, Automatic >> Repair and Diagnosis >> Restraints >> Seat Belts >> Seat Belt (Except Hybrid) >> Rear Seat Inner Belt Assembly >> Removal

Rear Seat Inner Belt Assembly: Removal

  1. REMOVE REAR SEAT CUSHION ASSEMBLY  (See REMOVAL )
  2. REMOVE REAR SEAT HEADREST ASSEMBLY 
  3. REMOVE REAR CENTER SEAT HEADREST ASSEMBLY 
  4. REMOVE REAR SEAT BACK ASSEMBLY (for Fixed Seat Type)  (See REMOVAL )
  5. REMOVE SEPARATE TYPE REAR SEAT BACK ASSEMBLY LH (for Fold Down Seat Type)  (See REMOVAL )
  6. REMOVE SEPARATE TYPE REAR SEAT BACK ASSEMBLY RH (for Fold Down Seat Type)  (See REMOVAL )
  7. REMOVE REAR SIDE SEAT BACK ASSEMBLY LH (for Fold Down Seat Type)  (See REMOVAL )
  8. REMOVE REAR SIDE SEAT BACK ASSEMBLY RH (for Fold Down Seat Type)  (See REMOVAL )
  9. REMOVE REAR SEAT BACK COVER (for Reclining Seat Type)  (See REMOVAL )
  10. REMOVE SEPARATE TYPE REAR SEAT BACK ASSEMBLY LH (for Reclining Seat Type)  (See REMOVAL )
  11. REMOVE SEPARATE TYPE REAR SEAT BACK ASSEMBLY RH (for Reclining Seat Type)  (See REMOVAL )
  12. REMOVE CENTER SEAT BACK ASSEMBLY (for Reclining Seat Type)  (See REMOVAL )
  13. REMOVE REAR DOOR SCUFF PLATE LH  (See REMOVAL )
  14. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP LH 
  15. REMOVE REAR DOOR SCUFF PLATE RH  (See REMOVAL )
  16. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP RH 
  17. REMOVE RECLINING REMOTE CONTROL LEVER SUB-ASSEMBLY LH (for Reclining Seat Type)  (See DISASSEMBLY )
  18. REMOVE RECLINING REMOTE CONTROL LEVER SUB-ASSEMBLY RH (for Reclining Seat Type) 

    HINT:

    Use the same procedures for the RH side and the LH side.

  19. REMOVE CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY LH  (See REMOVAL )
  20. REMOVE CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY RH 

    HINT:

    Use the same procedures for the RH side and the LH side.

  21. REMOVE REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH (for TMC Made) 
    1. Remove the bolt and the rear seat inner with center belt assembly RH.
      Fig 1: Identifying Rear Seat Inner With Center Belt Assembly RH Bolt
      G04979790Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  22. REMOVE REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH (for TMMK Made) 
    1. Remove the nut and the rear seat inner with center belt assembly RH.
      Fig 2: Identifying Rear Seat Inner With Center Belt Assembly RH Nut
      G04979791Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  23. DISCONNECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH (for TMC Made) 
    1. Remove the bolt and disconnect the floor end of the rear seat inner with center belt assembly LH.
      Fig 3: Identifying Floor End Of Rear Seat Inner With Center Belt Assembly LH Bolt
      G04979792Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  24. DISCONNECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH (for TMMK Made) 
    1. Remove the nut and disconnect the floor end of the rear seat inner with center belt assembly LH.
      Fig 4: Identifying Floor End Of Rear Seat Inner With Center Belt Assembly LH Nut
      G04979793Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  25. REMOVE ROOF SIDE INNER GARNISH LH  (See REMOVAL )
  26. REMOVE ROOF SIDE INNER GARNISH RH  (See REMOVAL )
  27. DISCONNECT REAR SEAT OUTER BELT ASSEMBLY (for LH Side) 
    1. Remove the bolt and disconnect the floor end of the rear seat outer belt assembly.
      Fig 5: Identifying Floor End Of Rear Seat Outer Belt Assembly Bolt
      G04979794Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  28. DISCONNECT REAR SEAT OUTER BELT ASSEMBLY (for RH Side) 
    1. Remove the bolt and disconnect the floor end of the rear seat outer belt assembly.
      Fig 6: Identifying Floor End Of Rear Seat Outer Belt Assembly Bolt
      G04979795Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  29. REMOVE REAR SEAT SHOULDER BELT COVER 
    1. Using a screwdriver, disengage the 4 claws and remove the rear seat shoulder belt cover.
      Fig 7: Disengaging Rear Seat Shoulder Belt Cover Claws
      G04979796Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      HINT:

      • Tape the screwdriver tip before use.
      • Use the same procedures for the RH side and the LH side.
  30. REMOVE REAR SEAT SHOULDER BELT HOLE COVER 
    1. Using a screwdriver, disengage the 4 claws and remove the rear seat shoulder belt hole cover.
      Fig 8: Disengaging Rear Seat Shoulder Belt Hole Cover Claws
      G04979797Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

    HINT:

    Tape the screwdriver tip before use.

  31. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY 
    1. Disconnect the connector.
    2. Disengage the 4 clips and the 5 claws.
    3. Pass the 3 rear seat belt floor anchors through the package tray trim panel assembly then remove the package tray trim panel assembly.
      Fig 9: Identifying Remove Package Tray Trim Panel Assembly Clips And Claws
      G04979798Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  32. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (for Reclining Seat Type) 
    1. Disconnect the connector.
    2. Disengage the 4 clips and the 5 claws.
    3. Pass the 3 rear seat belt floor anchors through the package tray trim panel assembly then remove the package tray trim panel assembly.
      Fig 10: Identifying Package Tray Trim Panel Assembly Clips And Claws (For Reclining Seat Type)
      G04979799Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  33. REMOVE REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH 
  1. Remove the bolt and the rear seat inner with center belt assembly LH.
    Fig 11: Identifying Rear Seat Inner With Center Belt Assembly LH Bolt
    G04979800Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals