LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Camry Base, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Emission Control System (2GR-FE)) >> Heated Oxygen Sensor >> Removal

Heated Oxygen Sensor: Removal

WARNING: This page is about a different variant/trim than selected.
  1. REMOVE ENGINE UNDER COVER LH 
  2. REMOVE ENGINE UNDER COVER RH 
  3. REMOVE FRONT EXHAUST PIPE ASSEMBLY  (See REMOVAL )
  4. REMOVE HEATED OXYGEN SENSOR (for Bank 1) 
    1. Using SST, remove the oxygen sensor.

      SST 09224-00010 

      Fig 1: Identifying Heated Oxygen Sensor (For Bank 1)
      G04975187Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. REMOVE HEATED OXYGEN SENSOR (for Bank 2) 
    1. Using SST, remove the oxygen sensor.

      SST 09224-00010 

      Fig 2: Identifying Heated Oxygen Sensor (For Bank 2)
      G04975188Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals