LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Camry Base, Automatic >> Repair and Diagnosis >> Electrical >> Gauges >> Instrument Panel >> Rear Console Box >> Removal

Rear Console Box: Removal

  1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle)  (See REMOVAL )
  2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)  (See REMOVAL )
  3. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH  (See REMOVAL )
  4. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH  (See REMOVAL )
  5. REMOVE FLOOR SHIFT POSITION INDICATOR HOUSING SUB-ASSEMBLY (for Automatic Transaxle)  (See REMOVAL )
  6. REMOVE UPPER CONSOLE PANEL (for Manual Transaxle)  (See REMOVAL )
  7. REMOVE UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Automatic Transaxle)  (See REMOVAL )
  8. REMOVE UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Manual Transaxle)  (See REMOVAL )
  9. REMOVE CONSOLE BOX POCKET  (See REMOVAL )
  10. REMOVE CONSOLE BOX CARPET  (See REMOVAL )
  11. REMOVE CONSOLE BOX ASSEMBLY 
    1. Remove the 2 screws.
      Fig 1: Locating Console Box Assembly Screws
      G04981380Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disengage the clamp.
    3. Remove the 2 bolts and the console box assembly.
      Fig 2: Locating Console Box Assembly Bolts
      G04981381Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals