Instrument Panel Safety Pad: Disassembly

REMOVE SIDE NO. 1 DEFROSTER NOZZLE DUCT (for TMC Made)
1. Remove the screw <F> and the side No. 1 defroster nozzle duct.
  
  Fig 1: Locating Side No. 1 Defroster Nozzle Duct Screw (For TMC Made)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE SIDE NO. 1 DEFROSTER NOZZLE DUCT (for TMMK Made)
1. Remove the screw <O> and the side No. 1 defroster nozzle duct.
  
  Fig 2: Locating Side No. 1 Defroster Nozzle Duct Screw (For TMMK Made)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE SIDE NO. 2 DEFROSTER NOZZLE DUCT (for TMC Made)
1. Remove the screw <F> and the side No. 2 defroster nozzle duct.
  
  Fig 3: Locating Side No. 2 Defroster Nozzle Duct Screw (For TMC Made)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE SIDE NO. 2 DEFROSTER NOZZLE DUCT (for TMMK Made)
1. Remove the screw <O> and the side No. 2 defroster nozzle duct.
  
  Fig 4: Locating Side No. 2 Defroster Nozzle Duct Screw (For TMMK Made)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE DEFROSTER NOZZLE ASSEMBLY (for TMC Made)
1. Remove the 3 screws <F> and the defroster nozzle assembly.
  
  Fig 5: Locating Defroster Nozzle Assembly Screws (For TMC Made)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE DEFROSTER NOZZLE ASSEMBLY (for TMMK Made)
1. Remove the 3 screws <O> and the defroster nozzle assembly.
  
  Fig 6: Locating Defroster Nozzle Assembly Screws (For TMMK Made)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE NO. 1 HEATER TO REGISTER DUCT (for TMC Made)
1. Remove the 3 screws <F> and the No. 1 heater to register duct.
  
  Fig 7: Locating No. 1 Heater Register Duct Screws (For TMC Made)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE NO. 1 HEATER TO REGISTER DUCT (for TMMK Made)
1. Remove the 3 screws <O> and the No. 1 heater to register duct.
  
  Fig 8: Locating No. 1 Heater Register Duct Screws (For TMMK Made)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE NO. 3 HEATER TO REGISTER DUCT (for TMC Made)
1. Remove the 3 screws <F> and the No. 3 heater to register duct.
  
  Fig 9: Locating No. 3 Heater Register Duct Screws (For TMC Made)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE NO. 3 HEATER TO REGISTER DUCT (for TMMK Made)
1. Remove the 3 screws <O> and the No. 3 heater to register duct.
  
  Fig 10: Locating No. 3 Heater Register Duct Screws (For TMMK Made)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE NO. 2 HEATER TO REGISTER DUCT (for TMC Made)
1. Remove the 2 screws <F> and the No. 2 heater to register duct.
  
  Fig 11: Locating No. 2 Heater Register Duct Screws (For TMC Made)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE NO. 2 HEATER TO REGISTER DUCT (for TMMK Made)
1. Remove the 2 screws <O> and the No. 2 heater to register duct.
  
  Fig 12: Locating No. 2 Heater Register Duct Screws (For TMMK Made)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY (See REMOVAL )
REMOVE NAVIGATION ANTENNA ASSEMBLY (See REMOVAL )
REMOVE FRONT PASSENGER AIRBAG ASSEMBLY (See REMOVAL )
REMOVE GLOVE BOX LIGHT ASSEMBLY
1. Disengage the 2 claws and remove the glove box light assembly.
  
  Fig 13: Identifying Glove Box Light Assembly Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE PLASMACLUSTER (w/ Plasmacluster) (See REMOVAL )
REMOVE NO. 1 INSTRUMENT PANEL PIN (for TMMK Made)
1. Remove the 2 screws <X> and 2 No. 1 instrument panel pins.
  
  Fig 14: Locating No. 1 Instrument Panel Pin Screws (For TMMK Made)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002