Navigation System (Except Hybrid): Multi-Display: Installation

INSTALL NAVIGATION RECEIVER ASSEMBLY
1. Install the navigation receiver assembly as shown in the illustration.
  
  Fig 1: Installing Navigation Receiver Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL RADIO NO. 2 BRACKET
1. Install the radio No. 2 bracket with the 5 bolts.
  
  Fig 2: Locating Radio No. 2 Bracket Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL RADIO NO. 1 BRACKET
1. Install the radio No. 1 bracket with the 5 bolts.
Fig 3: Locating Radio No. 1 Bracket Bolts
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NAVIGATION RECEIVER WITH HEATER CONTROL PANEL ASSEMBLY
1. Connect each connector.
2. Engage the 4 clips.
3. Install the navigation receiver with heater control panel assembly with the 4 bolts.
Fig 4: Locating Navigation Receiver With 4 Heater Control Panel Assembly Bolts & 4 Clips
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL INSTRUMENT PANEL NO. 2 REGISTER ASSEMBLY (See INSTALLATION )
INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY (See INSTALLATION )
INSTALL UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Automatic Transaxle) (See INSTALLATION )
INSTALL UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Manual Transaxle) (See INSTALLATION )
INSTALL FLOOR SHIFT POSITION INDICATOR HOUSING SUB-ASSEMBLY (for Automatic Transaxle) (See INSTALLATION )
INSTALL UPPER CONSOLE PANEL (for Manual Transaxle) (See INSTALLATION )
INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH (See INSTALLATION )
INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH (See INSTALLATION )
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle) (See INSTALLATION )
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle) (See INSTALLATION )
INSERT MAP DISC