Stereo Component Amplifier: Removal

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait for 90 seconds after disconnecting the cable to prevent the airbag working.
REMOVE SEAT TRACK COVER RH (for Manual Seat)
HINT:

Use the same procedures for the RH side and the LH side (See REMOVAL ).
REMOVE INNER SEAT TRACK BRACKET COVER RH (for Manual Seat)
HINT:

Use the same procedures for the RH side and the LH side (see REMOVAL ).
REMOVE FRONT SEAT ASSEMBLY RH (for Manual Seat)
HINT:

Use the same procedures for the RH side and the LH side (see REMOVAL ).
REMOVE SEAT TRACK COVER RH (for Power Seat)
HINT:

Use the same procedures for the RH side and the LH side (See REMOVAL ).
REMOVE INNER SEAT TRACK BRACKET COVER RH (for Power Seat)
HINT:

Use the same procedures for the RH side and the LH side (See REMOVAL ).
REMOVE FRONT SEAT ASSEMBLY RH (for Power Seat)
HINT:

Use the same procedures for the RH side and the LH side (See REMOVAL ).
REMOVE AUDIO AMPLIFIER COVER
1. Remove the 2 clips and audio amplifier cover.
  
  Fig 1: Locating Audio Amplifier Cover Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE STEREO COMPONENT AMPLIFIER ASSEMBLY
1. Disconnect each connector and remove the bolt.
2. Disengage the clip.
  
  Fig 2: Locating Stereo Component Amplifier Assembly Clip And Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Remove the bolt and stereo component amplifier assembly as shown in the illustration.
  
  Fig 3: Locating Stereo Component Amplifier Assembly Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002