Radio Receiver: Removal

REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle) (See REMOVAL )
REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle) (See REMOVAL )
REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH (See REMOVAL )
REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH (See REMOVAL )
REMOVE FLOOR SHIFT POSITION INDICATOR HOUSING SUB-ASSEMBLY (for Automatic Transaxle) (See REMOVAL )
REMOVE UPPER CONSOLE PANEL (for Manual Transaxle) (See REMOVAL )
REMOVE UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Automatic Transaxle) (See REMOVAL )
REMOVE UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Manual Transaxle) (See REMOVAL )
REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY (See REMOVAL )
REMOVE INSTRUMENT PANEL NO. 2 REGISTER ASSEMBLY (See REMOVAL )
REMOVE RADIO RECEIVER WITH HEATER CONTROL PANEL ASSEMBLY
1. Remove the 4 bolts.
2. Pull the radio receiver with heater control panel assembly toward the rear of the vehicle and disengage the 4 clips.
3. Disconnect each connector and remove the radio receiver with heater control panel assembly.
  
  Fig 1: Identifying Radio Receiver With Heater Control Panel Assembly Clips And Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE RADIO NO. 1 BRACKET
1. Remove the 5 bolts and radio No. 1 bracket.
  
  Fig 2: Locating Radio No. 1 Bracket Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE RADIO NO. 2 BRACKET
1. Remove the 5 bolts and radio No. 2 bracket.
  
  Fig 3: Locating Radio No. 2 Bracket Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE RADIO RECEIVER ASSEMBLY
1. Remove the radio receiver assembly as shown in the illustration.
  
  Fig 4: Removing Radio Receiver Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002