Rear Combination Light Assembly: Installation

INSTALL REAR LIGHT ASSEMBLY
1. Engage the pin and install the rear light assembly.
2. Install the 3 nuts.
  Torque: 3.6 N*m (37 kgf*cm, 32 in.*lbf)
  
  Fig 1: Identifying Rear Light Assembly And Nuts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Connect the connector and clamp.
Fig 2: Locating Connector And Clamp
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL LUGGAGE COMPARTMENT DOOR COVER (See REMOVAL )
INSTALL REAR COMBINATION LIGHT ASSEMBLY
1. Engage the clip and install the rear combination light assembly.
2. Install the 3 nuts.
  Torque: 3.6 N*m (37 kgf*cm, 32 in.*lbf)
  
  Fig 3: Installing Combination Light Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Connect the 2 connectors and clamp.
Fig 4: Locating Connectors And Clamp
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL REAR FLOOR FINISH PLATE (See INSTALLATION )
INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK (See INSTALLATION )
INSTALL LUGGAGE COMPARTMENT SIDE TRAY ASSEMBLY (See INSTALLATION )
INSTALL SPARE WHEEL COVER ASSEMBLY
INSTALL SPARE WHEEL COVER CLAMP
INSTALL LUGGAGE COMPARTMENT FLOOR MAT
INSTALL REAR BUMPER ASSEMBLY (w/o Rear Lower Spoiler) (See INSTALLATION )
INSTALL REAR BUMPER ASSEMBLY (w/ Rear Lower Spoiler) (See INSTALLATION )
INSTALL REAR FLOOR BOARD (w/ Rear Lower Spoiler) (See INSTALLATION )