Rear Bumper: Installation

INSTALL REAR BUMPER ASSEMBLY (w/o Rear Lower Spoiler)
1. Engage each claw.
2. Install the rear bumper assembly with the 6 screws and 2 clips.
  
  Fig 1: Identifying Rear Bumper Assembly Screws And Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Install the 2 rear bumper plates.
  
  Fig 2: Locating Rear Bumper Plates Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL REAR BUMPER ASSEMBLY (w/ Rear Lower Spoiler)
1. Engage each claw.
2. Install the rear bumper assembly with the 6 screws.
  
  Fig 3: Identifying Rear Bumper Assembly Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Install the 2 rear bumper plates.
  
  Fig 4: Locating Rear Bumper Plates Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL REAR FLOOR BOARD (w/ Rear Lower Spoiler)
1. Install the rear floor board with the 3 nuts, 2 clips and 4 screws.
  
  Fig 5: Identifying Rear Floor Board Clips And Nuts (W/ Rear Lower Spoiler)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002