LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Camry Base, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lighting (Except Hybrid) >> Headlight Dimmer Switch >> Installation

Headlight Dimmer Switch: Installation

  1. INSTALL HEADLIGHT DIMMER SWITCH ASSEMBLY 
    1. Engage the claw while loosening the clamp as shown in the illustration.
      Fig 1: Installing Headlight Dimmer Switch Assembly
      G04980205Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the headlight dimmer switch assembly with the clamp.
    3. Connect the connector.
  2. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY  (See INSTALLATION )
  3. INSTALL SPIRAL CABLE WITH STEERING ANGLE SENSOR  (See INSTALLATION )
  4. INSTALL STEERING COLUMN COVER  (See INSTALLATION )
  5. INSTALL STEERING WHEEL ASSEMBLY  (See INSTALLATION )
  6. INSPECT STEERING WHEEL CENTER POINT 
  7. INSTALL STEERING PAD  (See INSTALLATION )
  8. INSTALL NO. 3 LOWER STEERING WHEEL COVER  (See INSTALLATION )
  9. INSTALL NO. 2 LOWER STEERING WHEEL COVER  (See INSTALLATION )
  10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  11. INSPECT STEERING PAD  (See INSTALLATION )
  12. INSPECT SRS WARNING LIGHT 

    (See DIAGNOSIS SYSTEM )

    Fig 2: Locating Headlight Dimmer Switch Assembly With Clamp
    G04980206Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals