LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Camry Base, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lighting (Except Hybrid) >> Headlight Assembly >> Removal

Headlight Assembly: Removal

  1. REMOVE COOL AIR INTAKE DUCT SEAL (for 2GR-FE)  (See REMOVAL )
  2. REMOVE FRONT BUMPER ASSEMBLY (w/o Fog Light)  (See REMOVAL )
  3. REMOVE FRONT BUMPER ASSEMBLY (w/ Fog Light)  (See REMOVAL )
  4. REMOVE HEADLIGHT ASSEMBLY 
    1. Remove the bolt and 2 screws.
    2. Disconnect the connectors and remove the headlight assembly.
      Fig 1: Identifying Headlight Assembly
      G04980118Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals