LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Camry Base, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lighting (Except Hybrid) >> Fog Light Assembly >> Installation

Fog Light Assembly: Installation

  1. INSTALL FOG LIGHT ASSEMBLY 
    1. Install the fog light assembly with the screw.

      Torque: 1.6 N*m (16 kgf*cm, 14 in.*lbf) 

    Fig 1: Installing Fog Light Assembly Screw
    G04980134Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL FRONT BUMPER ASSEMBLY  (See INSTALLATION )
  3. INSTALL COOL AIR INTAKE DUCT SEAL (for 2GR-FE)  (See INSTALLATION )
  4. VEHICLE PREPARATION FOR FOG LIGHT AIM ADJUSTMENT (See  ADJUSTMENT   ) 
  5. PREPARATION FOR FOG LIGHT AIMING (See  ADJUSTMENT   ) 
  6. FOG LIGHT AIMING INSPECTION (See  ADJUSTMENT   ) 
  7. FOG LIGHT AIMING ADJUSTMENT (See  ADJUSTMENT   ) 
scientia non olet · About LEMON Manuals