Front Seat Inner Belt Assembly: Installation

INSTALL FRONT SEAT INNER BELT ASSEMBLY
1. Install the front seat inner belt assembly with the nut.
  
  Fig 1: Identifying Front Seat Inner Belt Assembly With Nut
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Torque: 42 N*m (428 kgf*cm, 31 ft.*lbf)
  
  NOTE: Do not allow the anchor part of the front seat inner belt assembly and the protruding parts of the front seat adjuster to overlap.
2. Install the 2 clamps.
3. Connect the connectors.
INSTALL FRONT SEAT CUSHION SHIELD ASSEMBLY (for Power Seat)
INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB (for Power Seat)
INSTALL RECLINING POWER SEAT SWITCH KNOB (for Power Seat)
INSTALL FRONT SEAT CUSHION SHIELD INNER (for Manual Seat)
INSTALL FRONT SEAT ASSEMBLY (w/o Front Seat Side Airbag)
for Manual seat type (See INSTALLATION )

for Power seat type (See INSTALLATION )
INSTALL FRONT SEAT ASSEMBLY (w/ Front Seat Side Airbag)
for Manual seat type (See INSTALLATION )

for Power seat type (See INSTALLATION )
INSTALL SEAT TRACK COVER RH (for Power Seat)
INSTALL SEAT TRACK COVER LH (for Power Seat)
INSTALL SEAT TRACK BRACKET COVER INNER FRONT LH (for Power Seat)
INSTALL SEAT TRACK BRACKET COVER OUTER FRONT LH (for Power Seat)
INSTALL SEAT TRACK COVER RH (for Manual Seat)
INSTALL SEAT TRACK COVER LH (for Manual Seat)
INSTALL SEAT TRACK BRACKET COVER INNER FRONT LH (for Manual Seat)
INSTALL SEAT TRACK BRACKET COVER OUTER FRONT LH (for Manual Seat)
PERFORM INITIALIZATION
Some systems need initialization when disconnecting the cable from the negative battery terminal (See INITIALIZATION ).
INSPECT SLIDE ADJUSTER LOCK (for Manual Seat) (See INSTALLATION )
CHECK POWER SEAT FUNCTION (for Power Seat) (See ON-VEHICLE INSPECTION )
INSPECT SEAT HEATER OPERATION (w/ Seat Heater System)
INSPECT SRS WARNING LIGHT
(See DIAGNOSIS SYSTEM )