Hybrid Vehicle Control Ecu: Removal

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY (See REMOVAL )
REMOVE INSTRUMENT PANEL FINISH PANEL LOWER No. 2 (See REMOVAL )
REMOVE HYBRID VEHICLE CONTROL ECU
1. Disconnect the 6 connectors from the hybrid vehicle control ECU.
2. Remove the 2 nuts and hybrid vehicle control ECU.
  
  Fig 1: Identifying ECM With Nuts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE ECM BRACKET No. 1
1. Remove the 2 screws and ECM bracket No. 1.
  
  Fig 2: Locating ECM Bracket No. 1 Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE ECM BRACKET No. 2
1. Remove the 2 screws and ECM bracket No. 2.
  
  Fig 3: Locating ECM Bracket No. 2 Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002