LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Highlander Hybrid Limited, AWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat (Hybrid) >> Rear No. 2 Seat Assembly >> Installation

Rear No. 2 Seat Assembly: Installation

  1. INSTALL REAR NO.2 SEAT ASSEMBLY 
    1. Install the rear No.2 seat assembly with the 4 bolts.

      Torque: 37 N*m (377 kgf*cm, 27 ft.*lbf) 

    2. Using the handle 3rd seat, recline the rear No.2 seat assembly.
    3. Install the 4 seat belt buckles to the No.2 seat cushion.
  2. INSTALL DECK SIDE TRIM BOX LH  (See INSTALLATION )
  3. INSTALL DECK SIDE TRIM BOX RH 
  4. INSTALL JACK CARRIER ASSEMBLY 
  5. INSTALL JACK ASSEMBLY 
  6. INSTALL JACK CARRIER SUPPORT 
  7. INSTALL REAR SEAT RECLINING COVER NO.2 LH  (See INSTALLATION )
  8. INSTALL REAR SEAT RECLINING COVER NO.2 RH 
  9. INSTALL REAR FLOOR FINISH PLATE  (See INSTALLATION )
  10. INSTALL DECK FLOOR BOX REAR  (See INSTALLATION )
  11. INSTALL DECK BOARD SUB-ASSEMBLY NO.2 
  12. INSTALL DECK BOARD SUB-ASSEMBLY NO.3 
  13. INSTALL DECK BOARD SUB-ASSEMBLY  (See INSTALLATION )
  14. INSTALL TONNEAU COVER ASSEMBLY 
scientia non olet · About LEMON Manuals