Audio System & Visual System (Hybrid): Multi-Display: Installation

INSTALL MULTI-DISPLAY
1. Install the multi-display controller bracket B with the 7 bolts.
  
  Fig 1: Locating Bolts And Multi-Display Controller Bracket B
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the multi display controller bracket A with the 7 bolts.
  
  Fig 2: Locating Bolts And Multi-Display Controller Bracket A
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY
1. Connect the connectors.
2. Install the integration control and panel assembly with the 6 bolts.
  
  Fig 3: Locating Bolts And Integration Control And Panel Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY CENTER (See INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
PERFORM INITIALIZATION OF NAVIGATION SYSTEM
(See INITIALIZATION )
PERFORM INITIALIZATION
NOTE: Some systems need initialization when disconnecting the cable from the negative battery terminal. (See INITIALIZATION )