LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Corolla CE, Automatic >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Restraint System >> Center Airbag Sensor Assembly >> Removal

Center Airbag Sensor Assembly: Removal

  1. PRECAUTION 
    CAUTION: Be sure to read "PRECAUTION " thoroughly before servicing (see ).
  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait for 90 seconds after disconnecting the cable to prevent the airbag working.
  3. REMOVE PARKING BRAKE HOLE COVER SUB-ASSEMBLY  (See REMOVAL )
  4. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)  (See REMOVAL )
  5. REMOVE CONSOLE PANEL UPPER  (See REMOVAL )
  6. REMOVE CONSOLE BOX CARPET 
  7. REMOVE REAR CONSOLE BOX SUB-ASSEMBLY  (See REMOVAL )
  8. REMOVE CENTER AIRBAG SENSOR ASSEMBLY 
    1. Disconnect the holder (with connectors).
    2. Remove the 3 bolts and the center airbag sensor assembly.
    Fig 1: Locating Center Airbag Sensor Assembly Bolts
    G05195751Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals