LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2006 >> Camry Base, Automatic >> Repair and Diagnosis >> Brakes >> Anti-Lock Brakes >> Brakes - Abs With EBD (DENSO Made) (Diagnostics) >> Abs Warning Light Circuit (Remains On) >> Inspection Procedure

Inspection Procedure

  1. RECONFIRM DTC (See  DTC CHECK/CLEAR  ) 
    DTC OUTPUT RESULT TABLE

    A Normal Code
    B Malfunction Code

    B: REPAIR CIRCUIT INDICATED BY OUTPUT DTC (See  DIAGNOSTIC TROUBLE CODE CHART  ) 

    A: Go to next step 

  2. CHECK HARNESS AND CONNECTOR (See  ELECTRONIC CIRCUIT INSPECTION PROCEDURE  ) 
    1. Check the harness and connector between the skid control ECU and combination meter.

    NG: REPAIR OR REPLACE HARNESS OR CONNECTOR 

    OK: Go to next step 

  3. CHECK COMBINATION METER ASSY 
    1. Check the combination meter assy (See COMBINATION METER ).

    NG: REPAIR OR REPLACE COMBINATION METER ASSY (See  HOW TO PROCEED WITH TROUBLESHOOTING  ) 

    OK: CHECK AND REPLACE BRAKE ACTUATOR ASSY (See  REPLACEMENT  ) 

scientia non olet · About LEMON Manuals