Tire & Wheel: Inspection

1. Check the tires for wear and proper inflation pressure.

   Cold tire inflation pressure: 

   COLD TIRE INFLATION PRESSURE
   
   

   Tire size	Front Rear kPa (kgf/cm2 , psi)	Rear kPa (kgf/cm2 , psi)
   215/60R16 93 V	200 (2.0, 29)	200 (2.0, 29)
   215/55R17 93V	220 (2.2, 32)	220 (2.2, 32)

2. Using a dial indicator, check the tire runout.

   Tire runout: 1.4 mm (0.055 in.) or less 

   Fig 1: Checking Tire Runout Using Dial Indicator

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

HINT:

If the spare tire is the same as ground tire, perform as "A" in the illustration, and if the spare tire is compact tire, perform as "B" in the illustration.

Fig 2: Sparing Tire Is Same As Ground Tire, Perform As (A) - (B)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Check and adjust the off-the-car balance.
2. If necessary, check and adjust the on-the-car balance.

   Imbalance after adjustment: 8.0 g (0.018 lb) or less 

   Fig 3: Inspecting Wheel Balance

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002