LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2004 >> Sienna CE >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Rear Lamps >> Rear Lamp Assembly >> Replacement

Rear Lamp Assembly: Replacement

  1. REMOVE BACK DOOR GARNISH CENTER BACK DOOR: 

    (See  OVERHAUL  ) 

    POWER BACK DOOR: (See  OVERHAUL  ) 

  2. REMOVE BACK DOOR SIDE GARNISH LH 

    BACK DOOR: (See  OVERHAUL  ) 

    POWER BACK DOOR: (See  OVERHAUL  ) 

  3. REMOVE BACK DOOR SIDE GARNISH RH 

    BACK DOOR: (See  OVERHAUL  ) 

    POWER BACK DOOR: (See  OVERHAUL  ) 

  4. REMOVE BACK DOOR PULL STRAP 

    BACK DOOR: (See  OVERHAUL  ) 

    POWER BACK DOOR: (See  OVERHAUL  ) 

  5. REMOVE BACK DOOR TRIM BOARD ASSY 

    BACK DOOR: (See  OVERHAUL  ) 

    POWER BACK DOOR: (See  OVERHAUL  ) 

  6. REMOVE REAR LAMP ASSY LH 
    1. Disconnect the connector.
    2. Release the 2 claw fittings and remove the 4 nuts and the rear lamp assy LH.
    Fig 1: Removing Rear Lamp Assy LH
    G03063316Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. REMOVE REAR COMBINATION LAMP BULB 
    1. Remove the combination lamp bulb.
  8. REMOVE REAR COMBINATION LAMP BULB 
    1. Remove the combination lamp bulb.
  9. INSTALL BACK DOOR PULL STRAP 

    BACK DOOR: (See  OVERHAUL  ) 

    POWER BACK DOOR: (See  OVERHAUL  )