Typical Enabling Conditions
WARNING: This page is about a different variant/trim than selected.
TYPICAL ENABLING CONDITIONS
| The monitor will run whenever the following DTCs are not present. | See LIST OF DISABLE A MONITOR |
| Time after engine start | 17 min. or more |
| ECT (Engine coolant temperature) | -15°C (5°F) or more |
| ATF temperature sensor circuit ECT sensor circuit IAT (Intake air temperature) sensor circuit | There is no malfunction in the circuits shown on the left. |
| Time after engine start | 18 min. and 20 sec. |
| Driving distance after engine start | 9 km/h (6 mph) |
| IAT (12 sec. after engine start) | -10°C (14°F) or more |
| ECT (12 sec. after engine start) | -10°C (14°F) or more |