LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2004 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Control System (SFI) - Diagnostics (2AZ-FE)) >> DTC P0340, P0341: Camshaft Position Sensor "A" Circuit >> Typical Enabling Conditions >> CMP Sensor Range Check P0340

CMP Sensor Range Check P0340

WARNING: This page is about a different variant/trim than selected.
TYPICAL ENABLING CONDITIONS SPECIFICATIONS (CMP SENSOR RANGE CHECK)

Starter ON
Minimal battery voltage while starter ON 11 V
scientia non olet · About LEMON Manuals