Typical Enabling Conditions: P0037:
WARNING: This page is about a different variant/trim than selected.
TYPICAL ENABLING CONDITIONS SPECIFICATIONS
| Either of the following conditions A and B are met: | |
| Conditions A | The following conditions (a), (b) and (c) are met. |
| (a) Time after engine start | 250 to 500 sec. |
| (b) Vehicle speed | Below 56 mph (90 km/h) |
| (c) Battery voltage | 10.5 V or more |
| Pass or Fail detection in this driving cycle | None |
| Conditions B | The following conditions (a), (b) and (c) are met. |
| (a) Time after engine start | 500 sec. or more |
| (b) Vehicle speed | 25 mph (40 km/h) or more |
| (c) Battery voltage | 10.5 V or more |