LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2004 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 885 (Steering System) >> Unit Removal And Installation >> Power Steering Oil Pump >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drain power steering fluid from reservoir tank.
  2. Remove engine room cover. Refer to "REMOVAL AND INSTALLATION ".
  3. Remove air duct assembly. Refer to "REMOVAL AND INSTALLATION ".
  4. Remove power steering reservoir tank.
  5. Remove serpentine drive belt from auto tensioner and power steering pump. Refer to "REMOVAL AND INSTALLATION ".
  6. Disconnect pressure sensor electrical connector.
  7. Remove high pressure and low pressure piping from power steering oil pump. Refer to "REMOVAL AND INSTALLATION ".
  8. Remove the bolts and the power steering pump.
scientia non olet · About LEMON Manuals