Manual Shift Test
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2002 Toyota Tundra, 2002 Toyota Tacoma, 2002 Toyota Sequoia, 2002 Toyota 4Runner, and 2001 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Perform manual shift test if no DTCs exist. Manual shift test determines if problem area is in electrical circuits or a mechanical transmission problem.
- With ignition off, disconnect electrical connector for solenoids from transmission. Road test vehicle and ensure transmission gear changes correspond with gearshift lever position. See GEAR APPLICATION table.
- If abnormality exists, a mechanical transmission problem exists. Turn ignition off. Reconnect electrical connector. Clear DTCs from ECM memory, as disconnecting electrical connector may set a DTC. See CLEARING DIAGNOSTIC TROUBLE CODES under SELF-DIAGNOSTIC SYSTEM.
GEAR APPLICATION
| Gearshift Lever Position | Gear |
|---|---|
| "D" | Overdrive |
| "2" | 3rd |
| "L" | 1st |
| "R" | Reverse |
| "P" | Park |