Clearing Diagnostic Trouble Codes
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2002 Toyota Tundra, 2002 Toyota Tacoma, 2002 Toyota Sequoia, 2002 Toyota 4Runner, and 2001 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.
Once repairs have been performed, DTCs must be cleared from ECM memory. DTCs may be cleared by performing one of the following:
- Generic scan tool (follow manufacturer's instructions).
- If using Toyota scan tool, turn ignition switch from ON position to ACC, or OFF position while in CHECK MODE.
- If using Toyota scan tool, switch from NORMAL MODE to CHECK MODE or vice-versa.