LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1995 >> Tercel Base, Automatic >> Repair and Diagnosis (Single Page) >> Suspension >> Rear Suspension >> Suspension - Rear >> Removal & Installation >> Wheel Bearings >> Installation

Wheel Bearings: Installation

  1. Using Installer (09608-30012) for inner bearing race and (09550-10012) for outer bearing race, install races. Pack bearings and hub cavity with grease. Install inner bearing.
  2. Coat oil seal lip with grease. Using Seal Installer (09550-10012), install oil seal in drum/hub. Install drum/hub and outer bearing. Adjust wheel bearings. See WHEEL BEARING ADJUSTMENT  under ADJUSTMENTS & INSPECTION.
scientia non olet · About LEMON Manuals