LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1995 >> Tercel Base, Automatic >> Repair and Diagnosis (Single Page) >> Suspension >> Rear Suspension >> Suspension - Rear >> Removal & Installation >> Axle Beam >> Installation

Axle Beam: Installation

  1. To install, reverse removal procedure, leaving axle beam-to-body bolts and strut bolts loose. Lower vehicle. Bounce vehicle several times to settle suspension.
  2. Tighten all retaining bolts to specification. Refer to the TORQUE SPECIFICATIONS . Fill and bleed brake system. Adjust wheel bearings. See WHEEL BEARING ADJUSTMENT  under ADJUSTMENTS & INSPECTION.
scientia non olet · About LEMON Manuals