LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1995 >> Tercel Base, Automatic >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Engine Mechanical (1.5L 4-CYL) >> Removal & Installation >> Crankshaft Rear Oil Seal >> Installation

Crankshaft Rear Oil Seal: Installation

  1. Ensure all sealing surfaces are clean. Apply grease to lip of new oil seal. Using Oil Seal Installer (SST 09223-15030), install oil seal in rear oil seal retainer until oil seal is even with surface of rear oil seal retainer.
  2. Apply Loctite to flywheel/drive plate bolts. Install and tighten flywheel/drive plate bolts to specification in a crisscross pattern. See TORQUE SPECIFICATIONS . To install remaining components, reverse removal procedure.
scientia non olet · About LEMON Manuals