LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1993 >> Paseo Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Overhaul - A-241E/H/L & A-243E) >> On-Vehicle Service >> Governor Assembly (A-241H) >> Removal

Governor Assembly (A-241H): Removal

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 1994 Toyota MR2, 1993 Toyota MR2, 1993 Toyota Celica, 1992 Toyota MR2, and 1992 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect speedometer cable. Remove governor cover and "O" ring. Remove governor body and thrust washer. Remove governor body adapter and gasket. To test governor, refer to GOVERNOR PRESSURE TEST (A-241H)  under HYDRAULIC PRESSURE TEST.

scientia non olet · About LEMON Manuals