Rear Brake Shoe Removal and Installation: Installation

Reference: REAR BRAKE ADJUSTER AND SHOE LEVER CHECK 

Reference: REAR BRAKE DRUM AND SHOE INSPECTION 

Install parts in reverse order of removal, noting the following.

• Before installing rear brake shoe to brake back plate, clean brake back plate and apply heat-resistance brake grease to A on which shoe rims rest.
  Fig 1: Identifying Heat-Resistance Brake Grease Application Areas

  Courtesy of SUZUKI OF AMERICA CORP.
• Push and rotate 90° hold down pin and install hold down pin and hold down spring.
• Install brake drum referring to REAR BRAKE DRUM REMOVAL AND INSTALLATION .