Tightening Torque Specifications
TIGHTENING TORQUE SPECIFICATIONS
| Fastening part | Tightening torque | ||
|---|---|---|---|
| N.m | kgf-m | lb-ft | |
| Front brake caliper bleeder plug | 9 | 0.9 | 6.5 |
| Rear brake caliper bleeder plug | 9 | 0.9 | 6.5 |
| Rear wheel cylinder bleeder plug | 8 | 0.8 | 6.0 |
| Flexible hose joint bolt | 23 | 2.3 | 17.0 |
| Master cylinder fixing nut | 18 | 1.8 | 13.0 |
| Brake pipe flare nut for M10 | 16 | 1.6 | 11.5 |
| Brake pipe flare nut for M12 | 19 | 1.9 | 14.0 |
| Booster mounting nut | 13 | 1.3 | 9.5 |
| Clevis pin lock nut | 26 | 2.6 | 19.0 |
NOTE:
The specified tightening torque is also described in the following.
FRONT BRAKE HOSE AND PIPE COMPONENTS
REAR BRAKE HOSE AND PIPE COMPONENTS
MASTER CYLINDER AND BRAKE BOOSTER COMPONENTS
FRONT BRAKE HOSE AND PIPE COMPONENTS
REAR BRAKE HOSE AND PIPE COMPONENTS
MASTER CYLINDER AND BRAKE BOOSTER COMPONENTS
Reference:
For the tightening torque of fastener not specified in this article, refer to FASTENERS INFORMATION .